Sharp UX-465L - Manual (Page 88)

Caller ID
86
3
Enter the phone number, including
the area code, by pressing the
number keys (max. of 20 digits).
4
Press the START/MEMORY key
and then the STOP key.
2
5
8
GHI JKL MNO
TUV WXYZ PQRS
ABC DEF
1
4
7
3
6
9
START/MEMORY
STOP
Blocking voice calls
With Caller ID turned on, you can use
the Anti Junk Fax function described
in
Blocking Reception of Unwanted
Faxes in this chapter (see page 93)
to block voice calls as well as fax
receptions (the Anti Junk Fax
function normally only blocks faxes).
In this case, when a voice call or a
fax transmission comes in from a
number you have specified as a
"Junk Number", your fax will break
the connection as soon as it receives
the calling phone number from the
caller ID service (before the second
ring).
To use this function, turn on the Anti
Junk function and then enter the
number in the Anti Junk Number List
as explained in
Blocking Reception of
Unwanted Faxes in this chapter (see
page 93).
Note: This function cannot be used if
you are using the Distinctive Ring
function.