Selecting a speaker pattern – Sony 3-289-450-45(1) User Manual
Page 18
18
GB
a)
If you have an additional front speaker system,
connect them to the SPEAKERS FRONT B
terminals. You can select the front speakers you
want to use with the SPEAKERS (OFF/A/B/A+B)
button on the receiver (page 30).
b)
If you connect only one surround back speaker,
connect it to the SPEAKERS SURROUND BACK
L terminals.
c)
When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.
Note
Before connecting the AC power cord (mains lead),
make sure that metalic wires of the speaker cords are
not touching each other between the SPEAKERS
terminals.
After you have install and connect your speaker, be sure to select the speaker pattern from
SPEAKER menu (page 44).
Select the speaker pattern according to your speaker setting. For details of each parameter, see the
table as follows.
Selecting a speaker pattern
Speaker connected
Front
left/right
Center
Surround
left/right
Surround
back left
Surround
back right
Subwoofer
Speaker pattern
3/4.1
a
a
a
a
a
a
3/4
a
a
a
a
a
3/3.1
a
a
a
a
a
3/3
a
a
a
a
2/4.1
a
a
a
a
a
2/4
a
a
a
a
3/2.1
a
a
a
a
3/2
a
a
a
2/3.1
a
a
a
a
2/3
a
a
a
2/2.1
a
a
a
2/2
a
a
3/0.1
a
a
a
3/0
a
a
2/0.1
a
a
2/0
a