Samsung SF-340 Series User Manual

Page 63

Advertising
background image

8.8

Memory Received
When it toggles with:

Ink Low. Install new ink cartridge

Load paper and press Enter

Install ink cartridge

The machine has data stored in memory. Depending on the mes-
sage do as follows:
Replace the print cartridge with new one.

Load the paper, and press

Enter

. There might be a jam. Clear the

jam as described in "Paper jams during printing" on page 8.11.

Install a print cartridge.

Fax

No answer from remote fax

The other machine has not answered after all your attempts to
send a fax.

Fax

No CID Number

The machine could not detect the CID (Caller ID) number.

Telephone

No Dial Number

There is no number in the redial memory, which is successfully
dialled up to now.

Telephone

No Message

There is no message to play or erase. There is no received short
message to read or print.

TAM (SF-345TP
only)/Telephone

No New Message

There is no new caller message. There is no received short
message.

TAM (SF-345TP
only)/Telephone

Not available while reprinting fax

The machine can not receive a new fax while printing the stored
faxes.

Fax

Not Found

The number you are searching does not exist in memory.

Telephone

Number already
registered

The number you are trying to register already exists in the
phonebook or junk fax list.

Telephone

Number Not Assigned

There is no number assigned to the One-Touch or two-digit
Speed number.

Telephone

Poll Code Error

The remote user entered wrong poll code.

Fax

Poll job exists already

You have programmed a polling send. Cancel scheduled job and
try again.

Fax

Polling Error
Check remote site

The machine you want to poll is not ready to answer your poll.
The person you are polling should have loaded their fax machine
with a document and be in send poll state.

Fax

Receiving Error.
Ask sender to try again.

There is an error while receiving a fax.

Fax

Record TAM OGM

To select TAM receive mode, you should record OGM prior to
pressing the

TAM

button.

TAM (SF-345TP
only)

Remove jammed
document

The document you are sending has jammed in the feeder. To
clear the document jam, see "Document jams during transmis-
sion" on page 8.11.
You tried to copy or fax a document which is longer than
390mm.

Document

Remove jammed paper and press
Enter.

The paper has jammed during printing. To clear the paper jam,
see "Paper jams during printing" on page 8.11.

Paper

Send Error. Try again.

There is an error while sending a fax.

Fax

System Busy
Try again later

There is no available resource to execute job you ordered.

Fax

To redial now, press Start Fax

The machine is waiting to automatically redial the fax number
that was busy or did not answer.

Fax

Processing Job

You attempt to enter My Favorites, while sending My Favorites
document or printing My Favorites document.

Fax

Display

Status/Solution

Related to:

Advertising