Sony LMD-3250MD - Manual (Page 29)

Adjustment Using the Menus
29
FUNCTION BUTTON SETTING
About the function assigned to the
function button
SCAN
Press to change the scan size of the picture. Press to
switch between NORMAL scan (0% scan), OVER scan
(20% over scan) and NATIVE (720P only) (see “Scan
mode image” on page 29).
ASPECT
Press to set the aspect ratio of the picture, 4:3 or 16:9.
EXT SYNC (external sync)
Press to operate the unit on an external sync signal
through the EXT SYNC IN connector.
EXT SYNC works when the component/RGB signals
are input.
BLUE ONLY
Press the assigned button to eliminate the red and green
signals. Only blue signal is displayed as an apparent
monochrome picture on the screen. This facilitates
“chroma” and “phase” adjustments and observation of
VCR noise.
MONO
Press the assigned button to display a monochrome
picture. When the buttons is pressed again, the monitor
switches automatically to color mode.
MULTI DISPLAY
Press the assigned button to display the multi display.
Set the multi display setting in the MULTI DISPLAY
SETTING menu (see page 28).
APA (Auto Pixel Alignment)
Press to adjust the picture automatically to maximum
clarity for the signal input to the HD15 input connector.
For finer according to the input signal, see “DOT
PHASE” on page 27.
When the menu screen is displayed, the APA does not
function.
Note
If the APA operation does not finish correctly depending
on the input signal, adjust DOT PHASE (page 27).
MIRROR IMAGE
Press the assigned button to flip and display the video
signal horizontally. This function is not available for the
PRESET 1 signal and the multi display.
Scan mode image
Submenu Setting
F1 BUTTON to F4
BUTTON Assigns the function to the function
buttons of the front panel and turns the
function on or off.
You can assign the function from
among SCAN, ASPECT, EXT SYNC,
BLUE ONLY, MONO, MULTI
DISPLAY, APA and MIRROR IMAGE.
Factory setting
• F1 button: EXT SYNC
• F2 button: SCAN
• F3 button: ASPECT
• F4 button: MULTI DISPLAY
F 1 B U T T O N : xxxx
F 2 B U T T O N : xxxx
F 3 B U T T O N : xxxx
F 4 B U T T O N : xxxx
USER CONFIG – FUNCTION BUTTON SETTING
–
Inp
u
t
4
3
16
9
NO
RM
AL
(zero
scan
)
4 : 3
1440 Ч 1080
16: 9
1920 Ч 1080
OV
E
R
(20
%
o
v
er
scan
) 4
3
1728 Ч 1080
16
9
1920 Ч 1080
NA
T
IV
E
(7
2
0
P)
1280 Ч 720