Sanyo DSR-5716P - Manual (Page 210)

ADVANCED MENU SET 9
English
209
Set when cameras with remote operation capability are
connected.
Perform the following connections and set camera control to
use in full screen display.
Connections necessary for remote operation:
z
Connect coaxial control cameras to the VIDEO terminal.
z Connect the Sanyo RS-485 control camera to the RS-485
terminal (RJ-11).
z Connect the other companies’ RS485/422 control camera
to the 2ND RS485/422 terminal.
1
Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2
Click “8. ADVANCED MENU SET”.
The “ADVANCED MENU SET” screen is displayed.
3
Click “2. CAMERA CONTROL SET”.
The “CAMERA CONTROL SET” screen is displayed.
The DSR-5709P displays only nine channels.
4
Set “PROTOCOL” to the protocol
corresponding to the dome camera.
[Settings] (‹ indicates default setting)
5
The address (000 to 127) is displayed in
“ADD”.
When “SANYO RS485” or “2ND RS485/422” is specified as
the protocol, the address is displayed automatically.
6
To “ACTION”, specify an interlocking
behavior of camera to be exhibited
when an alarm is detected.
You can control the behavior of the camera such as alarm-
triggered lens orienting, and pan and tour movement.
[Settings] (‹ indicates default setting)
z For “PRESET”, you can set “PRESET2-9” with DSR-5709P
and “PRESET2-16” with DSR-5716P.
z Actually available actions depend on each camera. For
more information, refer to the camera's instruction manual.
7
Use the same procedure to set the other
channels.
8
Set “2ND RS-485/422 PROTOCOL”.
[Settings] (‹ indicates default setting)
‹ OFF, BBV, KALATEL, PELCO, SENSORMATIC
9
Set “DATA SPEED”.
[Settings] (‹ indicates default setting)
‹ 9600bps, 4800bps, 2400bps
10
Click [SAVE].
The setting is saved.
2. CAMERA CONTROL SET
Setting Description
‹ OFF No protocol
SANYO RS485 SANYO RS485
BBV COAX
BBV COAX
(Also supports AUX commands.)
PELCO COAX PELCO COAX
2ND RS-485/422 2ND RS-485/422
COAX (H-SSP) COAX (H-SSP)
5
4
8
10
6
9
Setting Description
‹ OFF No action triggered.
PRESET
Moves the camera lens to the angle
corresponding to your selected preset
number.
PAN Starts automatic panning.
TOUR Starts tour.
SEQUENCE Starts sequence.