Sanyo DSR-5716P - Manual (Page 76)

INITIAL SET 1
English
75
Example 2: Setting time period operation as follows.
Automatic selection and monitor masking for “TIME
PERIOD A”. (default setting)
Motion sensing for “TIME PERIOD B”.
9
Turn the jog dial to select “MOTION
SENSOR” within “SELECT TIME
PERIOD” and then turn the shuttle dial
clockwise.
“TIME PERIOD A” flashes.
10
Turn the jog dial to select “TIME
PERIOD B” and then turn the shuttle
dial clockwise.
The cursor moves to “TIME PERIOD A”.
[Settings] (‹ indicates default setting)
11
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
z Automatic selection, masking, and motion sensors are all
set to “TIME PERIOD A” by default setting.
z For the above settings, “SEQUENCE” indicates automatic
screen selection period and monitor settings (JP.134),
“MASK” indicates mask settings (JP.136), and “MOTION
SENSOR” indicates motion sensor settings (JP.105).
Timer period operations settings
Setting Description
‹ TIME PERIOD A Applies the setting of “TIME PERIOD A”
TIME PERIOD B Applies the setting of “TIME PERIOD B”
ALL DAY LONG
Applies the same setting for a whole day,
instead of different setting for each time
period.
z SEQUENCE, MASK:
Fixed to “T1 (00:00 - 24:00)”.
z MOTION SENSOR:
Depends on the setting of “T1”.
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 06:00 11:30 13:30 18:00
TIME PERIOD B 06:00 08:00 14:30 20:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION SENSOR TIME PERIOD A
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 06:00 11:30 13:30 18:00
TIME PERIOD B 06:00 08:00 14:30 20:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION SENSOR TIME PERIOD B
EXIT/OSD