Sony LMD-2140MD - Manual (Page 19)

Location and Function of Parts and Controls
19
Location and Function of Parts and Controls
Front Panel
a [/a (Power) switch
Press
[ to turn on the power and a to turn off the power.
When the power is turned on, the POWER indicator
lights.
b Tally lamp
The lamp lights by the connection to control the tally.
For details, refer to “Pin assignment” on page 38.
c APA (Auto Pixel Alignment) key
Adjust a picture clearest automatically while a signal is
input from the HD15 input connector. To adjust the
picture further for finer picture due to the input signal,
see the “DOT PHASE” on page 32.
Press the MENU key to stop the APA operation.
The APA function does not work when the menu is
displayed.
d 8 (Brightness) +/– keys
+: press for more brightness.
–: press for less brightness.
The value is reset to the default setting by pressing the +
and – keys simultaneously.
e 6 (Contrast) +/– keys
+: press to make the contrast stronger.
–: press to make the contrast weaker.
The value is reset to the default setting by pressing the +
and – keys simultaneously.
f MENU key
Press to display the on-screen menu.
Press again to clear the menu.
The USER SERVICE menu (on page 35) appears by
keeping the MENU key pressed.
For menu operations, refer to “Using the Menu” on
page 27.
g Arrow keys ( M/m/</,)
Select the menu or to make various adjustments.
h ENTER key
Press to decide a selected item in the menu.
i USER MEMORY key
Press to load the picture settings saved in the USER
MEMORY menu (on page 33).
j INPUT M/m keys
Select the input signal. Each time you press the
M key,
the input signal switches as follows. When the
m key is
pressed, the input signal switches in reverse order.
APA MENU ENTER INPUT
POWER
REMOTE
USER MEMORY
+ – + –
+
–
+
– -
3 4 5 0 6 7 8 9 qa qd qs
2
1
C O M P O S I T E T
r
Y / C
r
R G B
r
C O M P O N E N T
r
O P T I O N A - 1
t
H D 1 5
R
DV I
R
O P T I O N B - 2
R
O P T I O N B - 1
R
O P T I O N A - 2