Dsr-70ap, Dsr-50p, Digital vtrs – Sony 798 MHz to 822 MHz User Manual

Page 45

Advertising
background image

45

DIGITAL VTRs

DSR-70AP

Portable Editing Recorder

General

System

PAL

DC input

XLR 4-pin (male), +12 V

Power consumption

15 W

Operating temperature

5 °C to 40 °C (41 °F to 104 °F)

Storage temperature

-20 °C to 60 °C (-4 °F to 140 °F)

Tape speed

Approx. 28.2 mm/s (DVCAM mode),
Approx. 18.8 mm/s (DV SP mode)

Recording/Playback time

184 minutes (DVCAM mode), 270 minutes (DV SP mode),
with PDV-184ME cassette

40 minutes (DVCAM mode), 60 minutes (DV SP mode),
with PDVM-40ME cassette

Mass

3.9 kg (8 lb 9 oz), excluding battery and tape

Dimensions (W x H x D)

247 x 92.5 x 311 mm (9 3/4 x 3 3/4 x 12 1/4 inches),
excluding projections
279 x 99 x 315 mm (11 x 4 x 12 1/2 inches),

including projections

Video

Rec mode

DVCAM/DV (SP mode only)

PB mode

DVCAM/DV (SP mode only)

Audio

Rec mode

48.0 kHz/16-bit (2CH)/
32.0 kHz/12-bit (4CH)/automatic (DV IN)

PB mode

48.0 kHz/16-bit (2CH)/32.0 kHz/12-bit (4CH)/
32.0 kHz/16-bit (2CH)/44.1 kHz/16-bit (2CH)
(automatically selected)

General

Power requirements

DC 12 V (DC 12 V In: XLR 4-pin male x1)

Power consumption

46 W (without options)

Operating temperature

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature

-20 °C to 60 °C (-4 °F to 140 °F)

Operating humidity

Less than 80%

Storage humidity

Less than 90%

Tape speed

28.221 mm/s

Recording/Playback time

Standard size:

184 min. with PDV-184ME/184N/184MEM

Mini size:

40 min. with PDVM-40ME/40N/40MEM

Fast forward/Rewind time

Standard size:

Less than 3 min. with PDV-184ME/184N/184MEM

Mini size:

Less than 1 min. with PDVM-40ME/40N/40MEM

Search speed

x ±32

Mass

5.8 kg (12 lb 12 oz)

Dimensions (W x H x D)

211 x 149 x 443 mm (8 3/8 x 5 7/8 x 17 1/2 inches)

LCD display (x1)

6.4-inch VGA, 640 (H) x 480 (V)

Built-in speaker (x1)

Monaural

Remote

RS-422A: D-sub 9-pin female x1

Video Signal Inputs

Analogue
Ref. Video

0.3 Vp-p, 75 Ω , sync negative

(BNC x2, loop-through connection)
Video

Composite, 1.0 Vp-p, 75 Ω , sync negative

(BNC x2, loop-through connection)
Component (BNC x3)*

1

Y:

1.0 Vp-p, 75 Ω , sync negative

R-Y:

0.7 Vp-p, 75 Ω (100%)

B-Y:

0.7 Vp-p, 75 Ω (100%)

S-Video (DIN 4-pin x1)

Y:

1.0 Vp-p, 75 Ω , sync negative

C:

0.3 Vp-p, 75 Ω (at burst level)

Digital
SDI (BNC x1)*

2

Conforms to Serial Digital Interface (270 Mb/s), ITU-R BT.656

SDTI (QSDI) (BNC x1)*

3

Conforms to SDTI (270 Mb/s), SMPTE 305M/322M

i.LINK (DV) (6-pin x1)*

2

IEEE 1394

Audio Signal Inputs

Analogue
Audio (CH-1,2)

+4/0/-60dBu, high impedence, balanced

(XLR 3-pin female x2)

*1 The optional DSBK-170 Analogue Component Input/Output Board is required.
*2 The optional DSBK-160A SDI & i.LINK/DV Input/Output Board is required.
*3 The optional DSBK-150 SDTI (QSDI) Input/Output Board is required.

DSR-50P

Portable Recorder

Video Signal Outputs

Analogue
Ref. Video (BNC x1)

0.3 Vp-p, 75 Ω , sync negative

Video 1/2(SUPER) (BNC x2)

Composite, 1.0 Vp-p, 75 Ω , sync negative

Component (BNC x3)*

1

Y:

1.0 Vp-p, 75 Ω , sync negative

R-Y: 0.7 Vp-p, 75 Ω (100%)
B-Y: 0.7 Vp-p, 75 Ω (100%)

S-Video (DIN 4-pin x1)

Y:

1.0 Vp-p, 75 Ω , sync negative

C:

0.3 Vp-p, 75 Ω (at burst level)

Digital
SDI (BNC x2)*

2

Conforms to Serial Digital Interface (270 Mb/s), ITU-R BT.656

SDTI (QSDI) (BNC x1)*

3

Conforms to SDTI (270 Mb/s), SMPTE 305M/322M

i.LINK (DV) (6-pin x1)*

2

IEEE 1394

Audio Signal Outputs

Analogue
Audio (CH-1,2 or CH-3,4)

+4/0/-6 dBu (selectable by menu)

XLR 3-pin male x2
Monitor (R/L) (Phono x1)

-6 dBu, 47 kΩ , unbalanced

Headphone

-∞ to -20 dBu, 8 Ω , unbalanced

(JM-60 headphone jack x1)

Time Code Input/Output

Time Code In (BNC x1)

0.5 to 18 Vp-p, 3.3 kΩ , unbalanced

Time Code Out (BNC x1)

2.2 Vp-p, ±3.0 dBu, 600 Ω , unbalanced

Supplied Accessories

Carrying Belt
Connector Cap (per interface)
Operating Instructions
Warranty Card

Input/Output Terminals

Video IN Composite

1.0 Vp-p, 75 Ω , Sync negative

S(4-pin mini DIN)

Y: 1.0 Vp-p, 75 Ω , Sync negative
C: 0.3 Vp-p (subcarrier burst) 75 Ω

Audio IN

XLR 3-pin (female) (+4 dBu/-20 dBu/-60 dBu) x 4,
impedance more than 3 kΩ with +48 V power supply
(independently switched for each channel)

Camera IN

26-pin camera connector

Composite

1.0 Vp-p, 75 Ω , Sync negative

Component

Y: 1.0 Vp-p, 75 Ω , Sync negative
B-Y: 0.7 Vp-p, 75 Ω , R-Y: 0.7 Vp-p, 75 Ω

Reference IN

BNC, Black Burst 75 Ω , Sync negative (use Video IN)

Video OUT 1 (Monitor)

BNC, 1.0 Vp-p, 75 Ω , Sync negative

Composite

Superimpose On/Off

Video OUT 2 Composite

BNC, 1.0 Vp-p, 75 Ω , Sync negative

S (4-pin mini DIN)

Y: 1.0 Vp-p, 75 Ω , Sync negative
C: 0.3 Vp-p (subcarrier burst) 75 Ω

Component OUT

BNC x 3
Y: 1.0 Vp-p, 75 Ω , Sync negative
B-Y/R-Y: 0.7 Vp-p, 75 Ω

Audio OUT

RCA pin x 4, -10 dBu
Standard output level -18 dB from full bit

Audio OUT (Monitor)

RCA pin

DV IN/OUT

6-pin (with lock)

Timecode IN

BNC, 0.5 to 18 Vp-p, 10 kΩ

Timecode OUT

BNC, 2.2 Vp-p, 600 Ω /1.2 Vp-p, 75 Ω

Control S

Stereo mini jack

Remote

Stereo mini jack
(Edge High/Edge Low/Level High/Level Low) (Tally)

Control

Stereo mini-mini jack (compatible with LANC as a player)

Headphone jack (left side)

Stereo standard jack, -19 dBu, with Level Control

Other

Colour LCD monitor

2.5-inch, 200,000 dots

Supplied accessories

LCD Protection Cover, Cleaning Cassette

Advertising
This manual is related to the following products: