SMC Networks AR4505GW - Manual (Page 42)

C
ONFIGURING THE
ADSL R
OUTER
4-4
Parameter Setting
Select your Country and Internet Service Provider. This will automatically
configure the
ADSL Router with the correct Protocol, Encapsulation and
VPI/VCI settings for your ISP.
If your Country or Internet Service Provider is not listed you will need to
manually enter settings. Go to “Parameter Setting - Country or ISP Not
Listed” on page 4-7 in the manual.
If your ISP uses PPPoA or PPPoE, then you will need to enter the
username, password and DNS Server address supplied by your ISP.
If your ISP uses 1483 Routing, then you will need to enter the IP address,
Subnet Mask, Default Gateway and DNS Server address supplied by your
ISP.
Note: By default 192.168.2.1 is set for the DNS Server address, this
needs to be changed to reflect your ISP’s DNS Server address.
Click “NEXT” to continue.