SMC Networks AR4505GW - Manual (Page 60)

C
ONFIGURING THE
ADSL R
OUTER
4-22
LAN
Use the LAN menu to configure the LAN IP address and to enable the
DHCP server for dynamic client address allocation.
Note: Remember to configure your client PCs for dynamic address
allocation. (See page 3-2 for details.)
Parameter Description
IP Address The IP address of the ADSL Router.
IP Subnet Mask The subnet mask of the network.
DHCP Server The ADSL Router comes with the DHCP function. Enable
this function to dynamically assign an IP address to client PCs.
Lease Time Set the IP lease time. For home networks this may be set to
Forever, which means there is no time limit on the IP address
lease.
Start IP Address Specify the start IP address of the DHCP pool. Do not include
the gateway address of the ADSL Router in the client address
pool. If you change the pool range, make sure the first three
octets match the gateway’s IP address, i.e., 192.168.2.xxx.
End IP Address Specify the end IP address of the DHCP pool.
Domain Name If your network uses a domain name, enter it here. Otherwise,
leave this field blank.