Specifications – Sony RDR-HX900 User Manual

Page 102

Advertising
background image

102

• Do not expose the disc to direct sunlight or heat

sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature may
rise considerably inside the car.

• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the

disc from the center out.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or anti-static
spray intended for vinyl LPs.

• Do not use the following discs.

– A disc that has a non-standard shape (e.g.,

card, heart).

– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker

adhesive on it.

Specifications

System
Laser:
Semiconductor laser
Channel coverage:

NTSC
VHF: 2 to 13/UHF: 14 to 69/CATV: A-8 to
A-1, A to W, W+1 to W+84

Video reception: Frequency synthesizer

system

Audio reception: Split carrier system
Antenna: 75-ohm antenna terminal for VHF/

UHF

Timer: Clock: Quartz locked/Timer indication:

12-hour cycle (digital)/Power back-up
duration: 1 hour

Video recording format: MPEG Video
Audio recording format/applicable bit rate:

Dolby Digital, 2 ch/256 kbps

When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the
DIGITAL OUT (OPTICAL or COAXIAL) jack
are converted to 48 kHz sampling frequency.

Inputs
(Jack name: Jack type/input level/input

impedance)

LINE IN 1/2/3
(AUDIO):
Phono jack/2 Vrms/more than 22

kilohms

(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C:

0.286 Vp-p

DV IN: 4-pin/i.LINK S100
COMPONENT VIDEO IN (Y, P

B

, P

R

):

Phono jack/Y: 1.0 Vp-p/P

B

/P

R

:

interlace*=0.648 Vp-p, interlace**=0.7
Vp-p

*

“Y/Pb/Pr In Black Level” is “On”

**

“Y/Pb/Pr In Black Level” is “Off”

CONTROL S IN: Mini jack

Advertising