Sony RDR-HX900 - Manual (Page 86)

86
1
Follow steps 1 to 3 of “Using the Setup
Displays” (page 83) to select “Settings” in the
Setup Display.
2
Select “Area Setup,” and press ENTER.
3
Select “USA/Canada,” and press ENTER.
4
Select your country, and press ENTER.
5
Select “Zip Code,” and press ENTER.
6
Enter your zip code number using the </M/
m/, buttons, and press ENTER.
7
Select “OK,” and press ENTER.
Clock
Manual Clock Set
Sets the clock manually.
1
Follow steps 1 to 3 of “Using the Setup
Displays” (page 83) to select “Settings” in the
Setup Display.
2
Select “Clock,” and press ENTER.
3
Press M/m to set the month, and press ,.
Set the day, year, hour, and minutes in
sequence. Press
</, to select the item to be
set, then press M/m to set the numbers. The
day of the week is set automatically.
4
Press ENTER to start the clock.
z Hint
To change the numbers in step 3, press < to return to the
item to be changed, and select the numbers by pressing
M/m.
Note
If the clock data is received automatically, “Clock”
cannot be selected from “Settings” in the Setup Display.
Set Top Box Control
You can control your cable box/satellite receiver
using the supplied set top box controller. See
“Step 7: Easy Setup” for details.
Set Top Box Control
When “Set Top Box Control” is set to “On,” you
can make the following settings. Note that when
you change “Set Top Box Control” to “On” or
“Off,” all of the timer recording settings will be
canceled.
◆Brand Code
See “Cable Box/Satellite Receiver Brand Code”
(page 112) for the brand code for your cable box
or satellite receiver, and enter the code using the
number buttons and ENTER.
◆Connection
Selects the connection you used for your cable box
or satellite receiver. When the cable box or
satellite receiver is connected to the recorder’s
LINE IN jacks, select the connection from
“Line1,” “Line2,” or “Line3.” When the cable box
or satellite receiver is connected to the recorder’s
VHF/UHF IN jack, select the output channel,
“Ch2,” “Ch3,” or “Ch4.”
◆Ch. digit lock
Allows you to select whether to fix the digits for
your cable box or satellite receiver.
Settings - Area Setup
USA / Canada :
Zip Code
USA
-----
Enter your zip code.
- - - - -
Area Setup - Zip code
Cancel
OK
Settings - Clock - Present Time
Set the time and date manually.
2004 / / 1 12 : Thu 00 AM 1
On Turns on the cable box/satellite
receiver control function. See
“Using the cable box/satellite
receiver control function”
(page 12).
Off Turns off the cable box/satellite
receiver control function. Select
this if you do not want to use the
supplied set top box controller.
Off Select this when your cable box or
satellite receiver only accepts a
three or more digit channel
number. Normally select this.