Sony RDR-HX900 - Manual (Page 36)

36
To lock the Picture in Guide
You can lock the Picture in Guide so that it does
not change when you move the cursor across other
titles.
Select the logo of the channel that you want to
lock from LISTINGS and press the blue button.
Press the blue button again to unlock the channel.
To customize the channel line-up
1
Select “SETUP” in the Main Menu Bar and
press ENTER.
2
Press M/m to select “Change channel display”
and press ENTER.
3
Press M/m to select a channel and perform one
of the following.
◆To hide the channel
Press the green button.
◆To change the channel number
Enter the new channel number using the number
buttons.
◆To change the order of the channels
Select channel you want to move and press
< to
highlight the channel logo. Press the blue button to
move the channel up, or press the green button to
move the channel down.
To match the channel number with the
broadcast station
If the channel number in the program listing does
not match the broadcast station, there may be more
than one channel lineup for your area. To change
the channel lineup, select “Change channel
lineup” from “SETUP” and press ENTER. Then
select a different channel lineup, if available.
To turn off the TV Guide On Screen system
Press [TV GUIDE] or EXIT on the remote.
z Hints
• Press the PAGE +/– buttons to change the program list
by page.
• Each time you turn on the power, the TV Guide On
Screen system automatically appears on your TV
screen. To turn off this function, select “SETUP” from
the Main Menu Bar, and then select “Review options.”
Then select “Off” and press ENTER.
Notes
• Programs that contain copy protection signals do not
appear in the Picture in Guide.
• The Picture in Guide is locked during recording and the
lock indicator appears in the Picture in Guide window.
You cannot unlock the Picture in Guide during
recording.
• If you are watching programs through a set top box, the
Picture in Guide may not change as fast as you move
the cursor. In this case, lock the Picture in Guide
(page 36).
• When you turn on the recorder, the same channel that
you were watching last will automatically appear, even
if you should change the channel on your set top box
while the recorder’s power is off.
• The screen saver will not appear with the TV Guide On
Screen system. The TV Guide On Screen system will
simply turn off if no buttons are pressed for more than
five minutes.