Preparing the receiver, Initializing the receiver, Setting the speakers – Sony STR-DH720HP User Manual

Page 33: Initializing the receiver setting the speakers, E 33

Advertising
background image

33

GB

D:\NORM'S JOB\SONY HA\SO0135\STR-DH720_PMRF_03\4262412113_GB\GB04GET_STR-
DH720-CEL.fm

masterpage: Right

STR-DH720

4-262-412-12(1)

Pre

p

ar
ing the

R

eceive

r

Initializing the receiver

Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to revert back to the factory default
settings.
Be sure to use the buttons on the receiver to
perform this operation.

1

Press ?/1 to turn off the
receiver.

2

Hold down ?/1 for 5 seconds.

The “CLEARING” appears on the
display panel for a while, then changes to
“CLEARED”.
Changes or adjustments made to the
settings are now reset to the defaults.

Setting the speakers

Select the speaker pattern according to the
speaker system which you are using.

1

Press GUI MODE.

After “GUI ON” appears on the display
panel for a while, the GUI menu appears
on the TV screen.

Press MENU if the GUI menu does not
appear on the TV screen.

2

Press

V/v repeatedly to select

Settings”, then press

or

b.

The Settings menu list appears on the TV
screen.

Preparing the Receiver

?/1

Selecting the speaker pattern

continued

Advertising