Samsung SIR-TS360 - Manual (Page 41)

41
CHAPTER 3
Setting up and connecting
3 3
2 Highlight the Set Dish menu item, then press the SELECT button.The Set Dish menu appears.
3 Highlight the Select Dish Type menu item, then press the SELECT button.
The Select Dish Type screen appears.
4 Use the right-arrow button on your remote control to highlight
the Dish Type option on the Select Dish Type screen.
5 Use the up- and down-arrow buttons on your remote control
to display the dish type you are using (Round, Oval-2, Oval-3,
or No Dish). As you display each dish type, the on-screen
pictures update showing you what each of these dish types
look like. If you plan to use your DIRECTV
® HD Receiver for
local off-air or cable TV programs, but do not plan to receive
DIRECTV
® programming, select No Dish.
6 A message appears warning you that your DIRECTV ® HD Receiver needs to reboot (turn itself
off and on) for the Dish Type setting to take effect. When you have displayed the correct dish
type, use the right-arrow button on your remote control to highlight the on-screen SELECT
button, then press the SELECT button.
7 To change the Dish Type to the new setting, highlight the
on-screen SELECT button, then press the SELECT button.
To leave the Dish Type setting unchanged, highlight the
on-screen Cancel button, and press the SELECT button.
After you select the on-screen SELECT button, the DIRECTV ® HD Receiver will reboot.
If you selected No Dish, the DIRECTV ® HD Receiver will perform an auto-scan to put your
cable and off-air channels into its memory so you can tune them and see them in the
on-screen Guide.
SIR-TS360-CHAPTER 3 11/18/03 9:42 AM Page 41