Samsung SIR-TS360 - Manual (Page 45)

45
CHAPTER 3
Setting up and connecting
3 3
Setting up local networks
You can use your DIRECTV ® HD Receiver to receive Guide information via satellite for
local off-air and cable TV channels. To use this feature, you must connect your DIRECTV ®
HD Receiver to a satellite dish as described earlier in this chapter, and you must set up the
Local Networks option in the menu system.
NOTE
If you do not connect your DIRECTV ® HD Receiver to a satellite dish and subscribe to
DIRECTV ® programming, you can still add local channels to the Guide by following the instructions
in the next section.
To set up the Local Networks menu option:
1 Press the MENU button on your remote control.
2 Highlight Setup, and press the SELECT button.
3 Highlight Installation, and press the SELECT button.
4 Highlight Local Networks, and press the SELECT button.
5 Highlight Primary Air, and press the SELECT button.
6 Highlight the first box in the ZIP code area, then use the
number buttons on your remote control to enter your ZIP code.
After a while, a list of cities appears below your ZIP code.
7 Highlight the name of the city from which your local channels
are broadcast, and press the SELECT button.
8
Highlight the on-screen BACK button, and press the SELECT
button. You return to the Local Networks screen.
9 (Optional) If you receive off-air broadcasts from a second city, highlight Secondary Air, and
press the SELECT button. Repeat steps 6 - 8 for the second city.
10 (Optional) If you receive programming from a cable TV service, highlight Cable, and press
the SELECT button. Repeat steps 6 - 8 for the cable service.
11
When you have finished entering your local broadcast and cable TV information, press the
EXIT button on your remote control. The DIRECTV
® HD Receiver will reboot (turn itself off
and then back on). After rebooting, the DIRECTV ® HD Receiver will acquire and provide
Guide information for your local off-air and cable TV channels.
SIR-TS360-CHAPTER 3 11/18/03 9:42 AM Page 45