SOYO SY-K7VTA PRO - Manual (Page 32)

BIOS Setup Utility SY-K7VTA PRO
28
2-3.3 Motherboard Connector
2-3.3.1 IDE Device Installation (HDD, CD-ROM)
This Motherboard offers two primary and secondary IDE device
connectors (IDE1, IDE2). It can support up to four high-speed Ultra DMA
33/66/100HDD or CD-ROM.
Connect one side of the ATA66/100 flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the Motherboard. The
ATA66/100 cable is backward compatible with ATA33 HDDs.
This Motherboard can support up to four HDDs.
SDRAM
SDRAM
□
Sigmatel
STAC9700
□
IDE 1 IDE 2
Pin-1
Primary
IDE
Secondary
IDE
1
1
39
39
40-pin
ATA 66/100
Flat Cable
80-Conductor