SOYO SY-K7VTA PRO - Manual (Page 74)

BIOS Setup Utility SY-K7VTA PRO
70
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-5.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled Turn off the on-board IDE On-Chip PCI IDE
Primary
Secondary Enabled Use the on-board IDE Default
Disabled IDE Prefetch Mode
Enabled
The onboard IDE drive
interfaces supports IDE
prefetching for faster drive
accesses. If you install a
primary and/or secondary
add-in IDE interface, set this
field to Disabled if the
interface does not support
prefetching.
Default
mode 0-4 0 is the slowest speed
4 is the fastest speed
IDE
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Auto For better performance and
stability, we suggest you use
the Auto setting to set the
HDD control timing. Default
Disabled IDE
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Auto Select Auto to enable Ultra
DMA Mode support. Default
3-5.2 Keyboard Controls
Keyboard Controls Setting Description Note
PCI Slot Default Init Display First
AGP
Choose which card – AGP
Display card or PCI VGA card –
to initialize first.