SOYO SY-K7VTA PRO - Manual (Page 96)

Drivers installation SY-K7VTA PRO
92
 VxD Driver
VIA AGP VxD Driver is to be installed if you are using an AGP
VGA device. VIAGART.VXD will provide service routines to your
VGA driver and interface directly to hardware, providing fast
graphical access.
 VIA Chipset Functions Registry
VIA Registry (INF) Driver is to be installed under Windows. The
driver will enable the VIA Power Management function.
 IRQ remapping utility (This driver is installed automatically)
VIA PCI IRQ Miniport Driver is to be installed under Windows 98
only, it sets the system's PCI IRQ routing sequence.
VIA Onboard Audio Driver for Win 9x/ME/NT/2000/XP
You have to install the drivers before installing any application for the
Onboard Audio.
K7VTAPRO VIA hardware(R) monitor for 9x/ME/NT/2000/XP
Your motherboard comes with a hardware monitoring IC. By installing
this utility Temperature, Fan speed and Voltages can be monitored. It is
also possible to set alarms when current system values exceed or fall
below pre-set values.
Select which driver you want to install and click OK, or click Cancel to
abort the driver installation and return to the main menu.
Note: Once you have selected a driver, the system will automatically exit
the SOYO CD to begin the driver installation program. When the
installation is complete, most drivers require to restart your system before
they can become active.
Step 3. Select which driver you want to install and click OK
Notice 1: Once you have selected a driver, the system will automatically exit
the SOYO CD to begin the driver installation program. When the
installation is complete, most drivers require to restart your system
before they can become active.