Sharp MX-B201D - Manual (Page 106)

105
TONER CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TONER CARTRIDGE IS
NEAR EMPTY." will appear in the display to alert you to purchase a new toner
cartridge. on purchasing a new toner cartridge. If copying is continued while the
indicator is lit, copies will gradually become lighter until the toner runs out. When the
toner runs out, the machine will stop operating, the error indicator will blink, and
"REPLACE THE TONER CARTRIDGE" will appear in the display. Follow the
procedure below to replace the toner cartridge.
1 Open the bypass tray, and
then open the side cover
while pressing the side
cover open button.
2 Push gently on both sides of
the front cover to open the
cover.
• After the machine stops, it may be possible to make a few more
copies by taking the toner cartridge out of the machine, shaking it
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the
toner cartridge.
• During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (
) to resume copying.