Sharp MX-B201D - Manual (Page 76)

USER SETTINGS
75
4
AUTO SHUT-OFF
TIME
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• This function automatically
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when the
power is on. All lights except the
power save indicator go off. To
resume normal operation, press
the [START] key (
). Normal
operation also resumes
automatically when a print job is
received or scanning is begun
from a computer. While in auto
power shut-off mode, no keys
(except the [START] key (
))
can be used.
7 LAYOUT IN 2IN1
1: PATTERN 1
2: PATTERN 2
• Use this setting to select the
layout pattern when two original
pages are copied onto a single
sheet of paper (see page 28 for
the layout patterns).
8
OFFSET
FUNCTION 1: ON
2: OFF
• When enabled, this function
offsets the position in the paper
output tray of sets of copies
during copy job, and print jobs
when using the printer function.
9
ROTATE ORIG.
IMAGE 1: ON
2: OFF
• When two-sided copying is
performed, this function rotates
the image on the back of the
original. This is convenient
when binding the copies at the
top (tablet binding).
10
AE/TEXT
RESOLUTION 1: 300dpi
2: 600dpi
• This setting is used to change
the copy resolution in AUTO
and TEXT mode from 600 x 300
dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality mode
is used.
11
2-SIDED COPY
MODE 1: HI-SPEED
2: NORMAL
• If the memory fills up when two-
sided copying is performed,
"NORMAL" can be selected to
make copying possible.
However, "NORMAL" results in
a slower copying speed.
Normally "HI-SPEED" is
selected to enable fast two-
sided copying.
12 MARGIN WIDTH
1: 5 mm
2: 10 mm
3: 15 mm
4: 20 mm
• Use this setting to set the
margin width.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation