Sanyo DVR-S120 - Manual (Page 22)

21
Checking, Changing and Deleting Reservations
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press TIMER to display the TIMER screen.
3. Select “Timer List” using 8 or 2, and press the k button.
Timer
To Exit Press TIMER
Video Plus+
Timer Setup
Timer List
4. The “Timer List” screen is displayed. Check the reservation details.
If necessary, change, delete, or make new reservations.
Timer List
To Exit Press TIMER
Press OK to Edit Entry,CLEAR to Delete
Total Recording Time: 04:15
Date
20/04 AV2 SP 21:00/23:00
Sat 02 LP 12:51/13:55
Ch. Mode VPS/PDC Start / End
Mo-Fr AV-3-S LP 06:00/06:30
To change a reservation
Select the line to change using 8 or 2, and press the k button. The
"Timer Setup" screen is displayed. Set the reservation details again. (For
details on operation methods, see page 20.)
To delete a reservation
Select the line to delete using 8 or 2, and press the CLEAR button.
The "Timer Delete" screen is displayed. Select "OK to Delete Timer" and
press the k button.
Cancel
OK to Delete Timer
Timer Delete
To make a new reservation
Select a free line, and press the k button. The display returns to
the "Timer Setup" screen. In this screen, you can reserve a different
programme.
1. Press TIMER to return to the “Timer” screen, and press TIMER again.
This ends checking of reservations.
Problem solving for programmed recordings
The following problems/error messages appears on the screen while operat-
ing the DVD recorder. Possible solutions are provided in this section:
Error Message Solution
Insert Record-
able Disc and
Press o to
Start Recording
A write-protected disc has been inserted. Cancel the
protection (See “To cancel disc protection” page 30)
or insert a different disc.
Invalid Setup,
please correct The data for the recording could not be transferred.
Please check the date, start time and end time of
the programmed recording.
Timer Overlaps
Existing Timer The information for two programmed recordings
overlap.
If you ignore this error message the TV programme
with the earlier start time will be recorded fi rst. You
will miss the start of the second programme.
Change the information for one of the recordings or
delete one of the recordings.
Warning Solution
Timer Recording!
Press o to
Start Recording.
The DVD recorder was switched on several minutes
before the start of a programmed recording. Switch
off the DVD recorder with o. A programmed
recording (timer) will only function if the DVD recorder
is switched off (button o).
DVR_S120_INS_MANUAL.indd 21 DVR_S120_INS_MANUAL.indd 21 5/19/2005 11:54:24 AM 5/19/2005 11:54:24 AM