Sanyo DVR-S120 - Manual (Page 7)

6
Inserting batteries
Install two “R6 (HP 7)” batteries.
NOTE:
- Remove the batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.
Remote control range
Operation Status Display
Front panel display
Remote sensor
Within approx.
6 meters
30° 30°
REC D
DVD RW
ANGLE PBC
VPS PDC REM NICAM HQ
SP
LP
EP
EP
1
8
7
10
12 13 11 14 15 16
2 9 3 4 5 6 20 17
18
19
These symbols can light up on your DVD recorder display:
1 w Playback in progress.
2 s Playback/record interrupted (Pause).
3 VPS/PDC Video Programming System / Programme Delivery Control: A VPS or PDC code will be transmitted for the selected
TV program.
4 REM Displays the Title/Track time remaining
5 A recording (timer) has been programmed.
6 NICAM The DVD recorder has detected a Nicam audio signal.
7 REC Recording in progress.
8 D Lights when playing a disc recorded with Dolby Digital Audio.
9 dts Lights when playing a disc recorded with DTS.
10 P Lights when progressive video is being output.
11 DVD+RW Displays the type of DVD disc in the recorder: DVD /DVD+R / DVD+RW.
12 ANGLE Displays the angle information of the DVD video disc.
13 PBC Play Back Control.
14 T Displays the current title number (DVD).
15 TR Displays the track selected/played (CD).
16 C Displays the chapter selected/played (DVD).
17 ST During playback a HiFi/2 channel tone was detected or a HiFi/2 channel tone was received.
18 CH Channel/programme number.
19 HQ, SP, LP, EP, EP+ Displays the recording quality selected during recording. Recording qualities HQ, SP, LP, EP or EP+ are shown
on the recorder display.
20 Multi-function display.
DVR_S120_INS_MANUAL.indd 6 DVR_S120_INS_MANUAL.indd 6 5/19/2005 11:54:21 AM 5/19/2005 11:54:21 AM