Sanyo DVR-S120 - Manual (Page 32)

31
When you press SYSTEM MENU, the following menu will be displayed.
In this menu, you can change various settings on the DVD recorder to
suit your particular requirements.
Video
Sound
Feature
Language
Recording
Setup
System Menu
The above menu will be displayed by pressing SYSTEM MENU not only
while disc operations are stopped, but also during playback, pause and
standby.
After you change a setting, the new details are stored to memory as
default settings for when you perform various operations.
For example, with the recording mode (picture quality), recordings will be
made in the mode set in this System Menu unless you specify a different
mode during recording. If you press REC MODE before recording to
change the recording mode, the setting you make will be enabled only
until the DVD recorder is turned off.
NOTE:
- During playback or while disc operations are paused, some items
cannot be changed depending on the title that is currently being
played.
- During playback or while disc operations are paused, the "Setup"
feature cannot be changed.
TV Screen Settings
1. Turn the TV on and select input from the DVD recorder. (For details
on operation methods, refer to your TV’s manual.)
2. Press SYSTEM MENU to display the System Menu.
3. Select “Video” using 8 or 2, and press 6 once. The setting items
at "Video Options" on the right of the screen can now be selected
using 8 or 2.
4. Select the item to be changed using 8 or 2, and change the set-
tings.
Video Options
Video
Sound
Feature
Language
Recording
Setup
4:3 LB TV Shape
Black Level
Video Shift
Interlace YUV Output
Video+RGB Video Output
System Menu
Setting Item Explanation
TV Shape Set the aspect ratio (shape) of your TV’s screen. When
you press the k button, the selection items are
displayed. Select the desired item using 8 or 2, and
press the k button.
See Page 14.
Black Level To use this fuature, press the k button to select it.
Each press of the k button selects or deselects
this setting.
Video Shift Fine-adjust the position of the video on the TV screen
to the left and right.
Press the k button, and then adjust the position
using 4 or 6 and press the k button.
YUV Output Set your TV’s display mode as “Interlace” or “Progres-
sive.” (When the DVD recorder is shipped from the
factory, the display mode is set to “Interlace.”)
When you press the k button, the selection items
are displayed. Select the display mode of your TV using
8 or 2, and press the k button.
Video
Output Set whether or not to output video to the S-Video
terminal. When the DVD recorder is connected to a
TV by the SCART cable or other cable, select “S-
Video+YUV.”
When you press the k button, the selection items
are displayed. Select video output using 8 or 2, and
press the k button.
NOTE:
- When you press 4, other items in the System Menu can be se-
lected.
Set other items as necessary.
5. To end setting, press SYSTEM MENU.
DVD RECORDER SETTINGS
Channel settings and other settings.
Settings for the TV screen
Settings for audio
Settings for features and operation
Settings for audio language, subtitle
language, and menu language
Settings for recording
(e.g. picture quality)
DVR_S120_INS_MANUAL.indd 31 DVR_S120_INS_MANUAL.indd 31 5/19/2005 11:54:27 AM 5/19/2005 11:54:27 AM