Basic operations, Ab c d, A. connecting the power cord – Sharp XG-NV4SU User Manual

Page 12: B. turning on the main power, C. turning on the power, D. adjusting the focus, E. adjusting the zoom, F.1 f.2

Advertising
background image

Operation

E-11

Basic Operations

a

b

c

d

When the main power is
on, the POWER indicator
lights up red.

When the power is on,
the LAMP REPLACE-
MENT indicator flashes
to show the operating
condition of the lamp.

Green:

Lamp is ready.

Flashing green:

Warming

up.

Red:

Change the lamp.

Focus knob

e

Zoom knob

or

ON

a. Connecting the Power Cord

Plug the supplied power cord into the AC
socket on the back of the projector.

b. Turning on the Main Power

Press the

MAIN POWER

switch on the back of

the projector. The POWER indicator lights up
red and the projector enters standby mode.

• When the main power is not on, the remote control cannot

be used to operate the projector.

c. Turning on the Power

Press

POWER ON

on the projector or the

remote control.

• The flashing green LAMP REPLACEMENT indicator

shows that the lamp is warming up. Wait until the indica-
tor stops flashing before operating the projector.

• If the power is turned off and then immediately turned on

again, it may take a short while before the lamp turns on.
(During this period, the LAMP REPLACEMENT indicator
flashes.)

• After the projector is unpacked and turned on for the first

time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.

d. Adjusting the Focus

Slide the focus knob until the image on the
screen becomes clear.

e. Adjusting the Zoom

Slide the zoom knob. The image can be ad-
justed to the desired size within the zoom
range.

f. Selecting the On-screen Display

Language
(See page 14 for details on using the
menu screens.)

The On-screen Display is set to “ENGLISH” at
the factory. The language for the On-screen
Display can be set to English, German,
Spanish, Dutch, French, Italian, Swedish or
Japanese.

1. Press

MENU

to display the menu screen. Press

ADJUSTMENT

∂/ƒ to select “LANGUAGE”.

Then press

ENTER

to display the “LANGUAGE”

screen.

2. Press

ADJUSTMENT

∂/ƒ to select the lan-

guage you want to display on the screen. Then
press

ENTER

. The On-screen Display is now

programed to display in the language selected.

On-screen Display

R G B 1 A D J .
R G B 1 I N P U T A D J .
I M A G E A D J .
A U D I O
S Y S T E M S E T U P
L A N G U A G E

: S E L .

: N E X T

ENTER

: E N D

MENU

L A N G U A G E

: S E L .

: E N T E R

ENTER

: E N D

MENU

N E D E R L A N D S

E S P A Ñ O L

D E U T S C H

E N G L I S H

S V E N S K A

I T A L I A N O

F R A N Ç A I S

f.1

f.2

g

XG-NV4SU (E)-b

98.10.19, 5:35 PM

11

Advertising