Sony CPD-L181 - Manual (Page 16)

Customizing Your Monitor
16
Locking the Controls
The control lock function disables all of the controls except
the u (power) switch, MENU and some other buttons on
the front panel.
Once you select “LOCK,” you can select only the following
items in the MENU OSD:
• EXIT
• CONTROL LOCK and FACTORY PRESET in the
OPTION OSD
If you press any locked button, the mark appears on
the screen.
1
Press the MENU button.
The MENU OSD appears.
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
3 Press the ˘/≥ buttons to select (CONTROL
LOCK).
4
Press the – button to select LOCK.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
MENU
MENU
OPTION
: 5SEC
: UNLOCK
OSD H POSITION
OPTION
UNLOCK
LOCK
CONTROL LOCK
OPTION
: 5SEC
ON
FACTORY PRESET
MENU
MENU
OPTION
: 5SEC
: UNLOCK
OSD H POSITION
To cancel the control lock
Press the + button in step 4 to select UNLOCK.
Resetting the Adjustments
You can reset all of the adjustments and settings to the
factory settings.
The color temperature is reset to 9300K, the zoom setting is
reset to FULL 1 mode, and the power saving delay time is
reset to 5 seconds. The control lock is cancelled. All other
adjustments return to the default settings. The on-screen
language, however, does not change.
1
Press the MENU button.
The MENU OSD appears.
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
3
Press the ˘/≥ buttons to select ? (FACTORY
PRESET).
4
Press the + button.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
MENU OK
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
MENU OK