Sony 3-300-703-11(2) - Manual (Page 28)

28 GB
Note
To control the iPod connected to the iPod 1
connector, use the buttons on CHANNEL A on
the unit. To control the iPod connected to the
iPod 2 connector, use the buttons on
CHANNEL B on the unit.
To use the system as a battery
charger
You can use the system as a battery
charger for the iPod when the system is on
or off.
The charging begins when the iPod is
placed on the iPod 1 or iPod 2 connector.
The charging status appears in the iPod
screen and when the system is off the
display of the unit change to clock. For
details, see the operating instructions of
your iPod.
To stop charging the iPod
Remove the iPod. If you stop charging the
iPod when the system is off, press
DISPLAY repeatedly until the display is
turned off (Power Saving mode).
Using optional
components
1
Connect a portable audio player
to the LINE IN 1 or LINE IN 2
jacks using audio cord (not
supplied).
2
Turn VOLUME +/–
counterclockwise (or press
VOLUME – on the remote) to turn
down the volume.
3
Press LINE IN 1 on CHANNEL A
or LINE IN 2 on CHANNEL B.
Using the remote:
Press and hold CHANNEL A, then
press FUNCTION +/– repeatedly to
select “LINE IN 1”.
Press FUNCTION +/– repeatedly to
select “LINE IN 2”.
If you want to hear the sound from
both connected component at once,
select both functions on the unit.
4
Start playing the connected
component(s).
5
Turn VOLUME +/– (or press
VOLUME +/– on the remote) to
adjust the volume.
To Do this
Fast forward or
fast rewind Play Hold down l or L
(or m or M on the
remote) during playback,
then release it at the point
you want.
Work much like
the Menu button
on the iPod Press MENU/RETURN
(or
B or TOOL MENU or
O RETURN on the
remote). You can return to
the previous menu or
select a menu much like
the Menu button on the
iPod or the touch
operation of the iPod
touch.
Set iPod to
Shuffle Songs Press PLAY MODE on
the remote repeatedly.
Set iPod to
Repeat Songs Press REPEAT on the
remote repeatedly.