Woodstock W1685 - Manual (Page 12)

-12-
SETUP
W1666, W1685 Dust Collectors
The following is a description of the main components
carefully packaged with your SHOP FOX ® Model W1666
and W1685 Dust Collectors. See Figure 8 and refer to
the list below and inventory your shipment.
If any part is missing, examine the packaging carefully
to be sure parts are not among the packing materials. If
the part is not found, find the part number in the back
of this manual and contact Woodstock International, Inc.
at (360)-734-3482 or at [email protected].
UNPLUG the power cord before you
do any assembly or adjustment tasks!
Otherwise electrocution may occur!
READ and understand this entire instruc-
tion manual before using this machine.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!
Inventory
SETUP
A. Transfer Hose
B. Impeller/Motor Assy
C. Separator
D. Base Plate
E. Bag Hanger
F. Separator Supports
G. 6" to 4" Inlet Y
H. Dust Collection Bags
I. Gasket
J. Casters
K. Bag Clamps
L. Hose Clamps
M. Wrenches
N. Outlet
O. Large Bolt Bag:
• Hex Bolt M8-1.25 X 16mm (14)
• Flat Washer 8mm (14)
• Flat Washer 6mm (16)
• Hex Nut M6-1.0 (16)
• Phlp Hd Scr M6-1 X 12 (16)
• Hex Wrench 4mm (1)
• Hex Wrench 5mm (1)
P. Small Bolt Bag:
• Hex Bolt M8-1.25 X 16 (12)
• Hex Bolt M8-1.25 X 25 (4)
• Flat Washer 8mm (20)
• Hex Nut M8-1.25 (4)
Immediately discard all plastic bags
and packing materials to eliminate a
choking and suffocation hazard for
children and animals.
B
A
C
D
M
H
I
G
K
L
E
F
Figure 8. Dust Collector Inventory.
J
N
O
P