Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 64)

User Manual
Page 64 of 92
PRIOWRR This is a priority based weighted round robin algorithm operating on CoS2-CoS6. CoS1 queues
have the highest priority and are not controlled by the WRR algorithm.
Of the three shaping algorithms available on the Shaper Configuration page, only one can be enabled
at a time. An example of each configuration is given as follows.
Example 1: HTB Queue Discipline Enabled
In the example below, HTB Queue Discipline is enabled. The PPPoE1 connection has a total of 300
Kbps of bandwidth, of which 100 Kbps is given to CoS1 and another 100 Kbps is given to CoS2. When
there is no CoS1 or CoS2 packet, CoS6 packets have the whole 300 Kbps of bandwidth.
HTB Queue Discipline enabled