Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 67)

User Manual
Page 67 of 92
Policy Routing Configuration
The Policy Routing Configuration enables you to configure policy routing and QoS.
Policy Routing Configuration
Field Description
Ingress Inter face The incoming traffic interface for a Policy Routing rule. Selections include LAN interfaces, WAN
interfaces, Locally generated (traffic), and not applicable. Examples of Locally generated traffic
are: voice packets, packets generated by applications such as DNS, DHCP, etc.
Destination
Interface The outgoing traffic interfaces for a Policy Routing rule. Selections include LAN Interfaces and
WAN interfaces.
DiffServ Code
Point The diffServ code point (DSCP) field value ranges from 1 to 255. This field cannot be configured
alone, additional fields like IP, Source MAC, and/or Ingress Interface should be configured.
Class of Service The selections are (in the order of priority): CoS1, CoS2, CoS3, CoS4, CoS5, CoS6, and N/A.
Source IP The IP address of the traffic source.
Mask The source IP Netmask. This field is required if the source IP has been entered.
Destination IP The IP address of the traffic destination.
Mask The Netmask of the destination. This field is required if the destination IP has been entered.
Protocol The selections are TCP, UDP, ICMP, Specify, and none. If you choose Specify, you need to enter
the protocol number in the box next to the Protocol field. This field cannot be configured alone,
additional fields like IP, Source MAC, and/or Ingress Interface should be configured. This field is
also required if the source port or destination port has been entered.
Source Port The source protocol port. You cannot configure this field without entering the protocol first.
Destination Port The destination protocol port or port range. You cannot configure this field without entering the