Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 66)

User Manual
Page 66 of 92
Example 3: PRIOWRR Enabled
In this third example, PRIOWRR is enabled. Since PRIOWRR operates only on the number of packets
being transmitted, the max rate field has been disabled. Only percentage can be assigned to the CoS2
- CoS6. CoS1 is not rate controlled (hence the field is not displayed). When there are no CoS1 packets,
CoS2, CoS3, CoS4 each has 10 percent, and CoS6 has 70 percent. This is similarly to the Low Latency
Queue discipline, except that one is packet-based, and the other is rate-based.
PRIOWRR enabled