SATO MB400 - Manual (Page 11)

MB400 Quick Guide Pg 11
4. Insert the label roll on the label guide boss inside
the
front cover.
Press the tab to adjust the label guide (right), and
adjust the guide to the width of the labels used.
Firmly insert the label roll on the bosses on the left
and right of the label guide.
Move the label roll to make sure that it is firmly
set on the bosses.
5. After peeling the lead tape on the roll, take the
leading edge of the first label on the roll and pull it
out via the platen roller. Then turn the front cover
in the direction of the arrow.
6. Close the front cover in the direction of the arrow.
Press the front cover until the cover Open/Close
lever clicks.
MB400 Quick Guide Pg 8
*Note
• If the CHARGE indicator on the charger does not light up, make sure that the battery
pack is firmly attached to the charger. The battery might not be able to charge if it is
not firmly attached.
• If an already charged battery pack is inserted into the charger, the CHARGE indicator
will turn red once (charging), however, it will soon change to green (fully charged).
• If charging a battery pack that has not been used for a long period, the HCARGE
indicator will flash for a while. This does not indicate an error, and you can continue
charging as it is. It the indicator continues to flash for a long time while charging,
replace the battery pack with a new one.
• The battery pack can be charged up to 300 times (during usage in regular
temperature). If the battery pack is fully charged but soon runs out, replace the
battery pack with a new one.
* Take down the date of purchase of the battery with a marker on the sticker
attached to the battery pack as a guideline of the number of times the battery can be
recharged (the life of the battery). For example, Date of purchase: 1/9/2002.
• The battery pack cannot be used when using the AC adapter. If the AC adapter jack
is plugged into the printer when using the battery, the power will be reset. If there
are any remaining print data, they will be lost.
Charging Time.
The charger time for one battery pack from empty until fully charged is about 90 minutes. For
two battery packs, it takes about 130 minutes. The charging time varies depending on the
environment.
Label guide boss