Sanyo STB1220C1 - Manual (Page 41)

37
9-1. Removing Front Grille
1) Pull the bottom part of the front grille toward you.
(Fig. 1- ➀ )
2) Lift up and unhook the grille to remove it. (Fig. 1- ➁ )
9-2. Removing Wall Sleeve
(1) While supporting the bottom part of the unit, pull it
out of the wall sleeve. (Fig. 2)
9-3. Removing Electrical Component
Box
(1) Remove knobs and the control panel from the
electrical component box.(Fig. 3)
(2) Remove the screws holding the lid of the electrical
component box, and also remove the wire clamp
holding the lead wires. (Fig. 4)
Fig. 4
Lid
Wire clamp
Fig. 3
Knob
Control
panel
Electrical compornent box
Fig. 2
Unit
Wall sleeve
Fig. 1
Front grille
➀
➁
Wall sleeve
9. DISASSEMBLY PROCEDURE