Sony MDS-JE480 User Manual

Page 11

Advertising
background image

Rec

o

rd

ing to

M
D

s

filename[D:\Data Folder\sem\4238553111MDSJE480CEL\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-11(1)]

masterpage:Left

(3 column)

11

GB

A track number might not be marked for tracks less

than 4 seconds long (in Stereo mode, Monaural
mode, and LP2 Stereo mode) or 8 seconds long (in
LP4 Stereo mode) during recording.

When recording from a component connected to the

ANALOG IN jacks with “T.Mark Off” selected or
when recording from a DAT deck or DBS tuner
connected to the DIGITAL IN connector, the entire
material may be recorded as a single track.

When recording from a DAT deck or DBS tuner

connected to the DIGITAL IN connector, the deck
will mark a track number whenever the sampling
frequency of the input signal changes, regardless of
the track marking parameter setting (“T.Mark LSyn”
or “T.Mark Off”).

Tip

You can mark track numbers even after recording has
finished. See “Dividing recorded tracks” on page 19.

Erasing blank portions
automatically (Smart Space/
Auto Cut)

The Smart Space function lets you make the
blank spaces between tracks 3 seconds long
automatically. If the Smart Space function is on
and there is no sound input for about 3 seconds
or more (but less than 30 seconds) while
recording, the deck replaces this silence with a
blank space of about 3 seconds and continues
recording.

Auto Cut: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the deck replaces this silence with a blank
space of about 3 seconds and enters recording
pause.

1

While the deck is stopped, press MENU/
NO.

2

Turn AMS (or press ./>
repeatedly) until “Setup?” appears,
then press PUSH ENTER or YES.

3

Turn AMS (or press ./>
repeatedly) until “S.Space On” appears,
then press PUSH ENTER or YES.

4

Turn AMS (or press ./>
repeatedly) to select the setting, then
press PUSH ENTER or YES.

5

Press MENU/NO.

Notes

Smart Space does not affect the order of the track

numbers being recorded, even if the blank space
occurs in the middle of a track.

Auto Cut is automatically turned on or off in tandem

with Smart Space.

If the deck continues recording pause for about

10 minutes after the Auto Cut is activated, recording
stops automatically.

No sound input for less than 30 seconds

Replaced with a blank space of 3 seconds
and recording continues

Off

On

To

Select

Turn on Smart Space
and Auto Cut

S.Space On (factory
setting)

Turn off Smart Space
and Auto Cut

S.Space Off

continued

No sound input for 30 seconds or more

Replaced with a blank space of 3
seconds and recording pauses

Off

On

Advertising