Editing recorded mds, Before editing, To cancel the last edit – Sony MDS-JE480 User Manual

Page 17: To quit while editing, When “tr protected” appears in the display, After editing

Advertising
background image

Editi

ng R

e

cor

d

ed

MD

s

masterpage:Left

(3 column)

filename[D:\Data Folder\sem\4238553111MDSJE480CEL\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-11(1)]

17

GB

To clear the last entered track

Press CLEAR to erase the track number.

To enter a track number over 10

Use >10. See this page for details.

3

Repeat step 2 to enter other tracks.

4

Press N.

Programme Play starts.

To stop Programme Play

Press x.

To check the total of programme

tracks

While the deck is stopped and the “PGM” lights
up, press LEVEL/DISPLAY/CHAR repeatedly.

To check the contents of the

programme during Programme Play

Turn AMS (press

./>

repeatedly).

To add a track to the end of the

programme

Do steps 2 above while the deck is stopped.

To erase all tracks in the programme

Press CLEAR repeatedly until all the track
numbers disappear.

To resume normal play

Press PLAY MODE repeatedly until “PGM”
turns off.

The programme remains even after

Programme Play ends or is stopped

Press

N

to play the programme again.

Notes

If you eject the MD, the programme will be lost.
The display shows “- - - m - - s” when the total

playing time of the programme exceeds 1,000
minutes.

“Step Full!” appears when you try to programme the

26th track.

Editing Recorded MDs

Before editing

You can edit an MD only when:

The MD is recordable.
The MD play mode is normal play.

To cancel the last edit

Use Undo Function to cancel the last edit and
restore the contents of the MD to the condition
before the edit.

To quit while editing

Press MENU/NO or x.

When “Tr Protected” appears
in the display

You cannot perform editing operations on
protected tracks (tracks checked out from a
USB connected computer using the Net MD
function, etc.) other than “Moving recorded
tracks” (page 21)
and “Naming a track or an
MD” (page 21) us
ing the deck.

After editing

Press EJECT A to remove the MD or press
?/1 to turn off the deck.
“TOC” or “TOC Writing” starts flashing. The
TOC is updated and recording is completed.

Before disconnecting the AC power

cord

MD editing is completed when the MD Table of
Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the deck. Do not disconnect the AC
power cord before updating the TOC (while
“TOC” is lit) or while updating the TOC (while
“TOC Writing” is flashing) to ensure a
complete editing.

Advertising