Samsung DM-S105 User Manual
Page 60
60
seCtIon 10 TOOLBOX: MY PROFILE, CAMERA, VOICE RECORDER
Change View Mode
The Change View Mode option lets you change your camera viewfinder
image from a portrait, full-screen view of the subject to a landscape, wide-
screen view without rotating your phone.
1. In the camera Options menu, select Change View Mode and press
. The View Mode menu pops up in the display.
2. Select Wide Screen or Full Screen and press
. You are returned
to the camera viewfinder screen, which shows the selected View
Mode image.
Color Tones
Color Tones lets you temporarily apply one of the following color-based
special effects to one or more pictures:
• Auto — No special effect.
• Negative — Reverses light and dark shades of gray.
• Sepia — Replaces all colors with shades of sepia.
• Emboss — Creates a three-dimensional effect in the
monochrome picture.
• Aqua — Replaces all colors with shades of aqua.
• Gray — Replaces all colors with shades of gray.
• Sketch — Reduces the picture to outlines.
note: the auto Color tone leAves the PiCture unChAnGeD.
1. In the camera Options menu, select Color Tones and press
. The
name of the current color tone appears in the top line of the display.
2. Use the Left/Right NAV KEY to show the various color tones and the
effects they have on a picture.
3. When you decide on the color tone you wish to use, press Select
(
) or
. The camera screen appears in the display with your
selected color tone applied.
The next time you press the Camera key ( ) or
, the camera
applies the selected color tone to your pix.
Self Timer
Self Timer lets you delay the exposure long enough so you or the person
taking the pix can join others in the pix.
1. In the camera Options menu, select Self Timer and press
. The
following options appear in the display:
• Off
• 5 Seconds
• 10 Seconds
2. Select the desired delay, and then press
. The Self Timer icon (
)
appears in the display.
The next time you press the Camera key ( ) or
, a countdown
timer appears in the display that indicates the time remaining before
the camera takes the pix.
Pix Controls
Pix Controls settings remain in effect until you change them.
1. In camera mode, (before taking a pix) press Options (
), select Pix
Controls and press
.
2. Select one of the following options and press
:
• Brightness
• White Balance
• Night Shot