Sony SLV-795HF - Manual (Page 49)

Getting Started
49 Getting Started
If the program information signal in your
area has several channel map patterns, the
Choose your Cable CH MAP menu
appears, and you must select the channel
map. See “To select the channel map” on
this page.
4
Press POWER to turn off the VCR.
The VCR sets the program guide channels
from 0:00 am to 5:00 am while the VCR is
turned off. (It takes about 1 hour to
complete channel mapping.)
• POWER
To select the channel map
If the program information signal in your area
has several channel map patterns (up to 8), the
Choose your Cable CH MAP menu appears:
• the first time you turn on the VCR after
completing channel mapping
• after selecting AUTO and pressing the
Joystick (EXECUTE) on the SMART
CHANNEL MAPPING menu
In this case, you have to select the channel map on the Choose your Cable
CH MAP menu.
1
Find the VCR Plus+ Channel Listing in your program guide. For
details, see page 47.
2
Push Joystick to ?// to select the channel map number you want by
checking the guide channel number in the program guide.
3
Press the Joystick (EXECUTE).
Notes
• It takes about 1 hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP CODE in
your area.
• When you move to a different area, you must set up the VCR again and enter your
new ZIP CODE in the EASY SET UP procedure.
continued
Choose your Cable CH MAP
MAP
Use t o s e l e c t
Th e n p u s h EXECUTE
1 2 3 4 5 6 7 8
KABC
KCBS
KAET
WNET 1 2 5
4
1 4
3 5
CNN
MTV
–
– –
– –
– –
–
9 8
5 5
– –
– –
Pu s h MENU t o q u i t
Choose your Cable CH MAP
MAP
Use t o s e l e c t
Th e n p u s h EXECUTE
1 2 3 4 5 6 7 8
KABC
KCBS
KAET
WNET 1 2 5
4
1 4
3 5
CNN
MTV
–
– –
– –
– –
–
9 8
5 5
– –
– –
Pu s h MENU t o q u i t