Sony SLV-795HF - Manual (Page 64)

Additional Operations
64
Playing/searching at various speeds (continued)
Using the Shuttle ring on the VCR
With the Shuttle ring on the VCR,
you can operate a variety of
playback options. There are two
ways for using the Shuttle ring,
normal mode and jog mode.
To use the Shuttle ring in normal mode
During playback or pause, turn the Shuttle ring clockwise or
counterclockwise. Each change in the Shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:
X 2
X 2 – X 1 –
Mark on the TV screen
Slow motion Pause Slow motion
in reverse
Playback mode Normal speed Double speed High speed
High speed Double speed Normal speed
in reverse in reverse in reverse
To use the Shuttle ring in jog mode
Use this mode for fram-by-fram playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the Shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the Shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the Shuttle ring.
To resume normal playback, press JOG again. The JOG indicator goes off.
JOG
Shuttle ring