Sony SLV-795HF - Manual (Page 61)

61 Basic Operations
Basic Operations
Setting the timer
manually
If VCR Plus+ is not available in your
area, follow the instructions below to set
the timer to record programs.
Before you start…
• Check that the VCR clock is set to the
correct time.
• Turn on your TV and set it to the
video channel. When using a cable
box, turn it on.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
MENU
POWER
INPUT
SELECT
Joystick
>/./?///
EXECUTE
continued
–
TIMER SET / CHECK
–
THU
DATE START STOP CH
/ – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
4 7 /
1
Press MENU and select TIMER SET/
CHECK.
2
Set the date, start and stop times, channel
number and tape speed:
1 Push Joystick to / to highlight each
item in turn.
2 Push Joystick to ./> to set each item.
To correct a setting, push Joystick to ? to
return to that setting and reset.
To record the same program every day or the same day every week,
push Joystick to . while the date is hilighting. For details, see
“Daily/weekly recording” on the next page.
To record from a source connected to the LINE –1 IN or LINE –2 IN
jacks, press INPUT SELECT to display “L1” or “L2” in the “CH”
position.
7
TIMER SET / CHECK
4
THU
DATE START STOP CH
/ – : – – – : – – – – SP
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
– – / – – : – – – : – – – – –
4 7 /
THU
INPUT
SELECT
EXECUTE
• MENU
1 2 3
4 5 6
7 8 9
0