Sony 3-289-204-42(3) - Manual (Page 75)

75 GB
D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-
STRDA2400ESUC\080TUN_GB.fm masterpage: Right
STR-DA2400ES
3-289-204-42(3)
T
u
ner Op
eratio
ns
8
Repeat steps 3 to 7 to preset
another station.
To tune to preset stations
1 Repeat steps 1 and 2 of “Presetting
radio stations”.
2 Press V/v to select the preset station
you want.
You can select a preset station as follows:
• AM band AM 1 to AM 30
• FM band FM 1 to FM 30
To name preset stations
1 Select a preset station you want to
name.
2 Press OPTIONS, then select “Name
Input”.
For details on naming operations, refer to
“Naming inputs” (page 86).
Using the Radio Data
System (RDS)
(Models of area code CEL, CEK,
ECE only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Simply select a station on the FM
band using Direct tuning (page 73),
Automatic tuning (page 72), or
preset tuning (page 74).
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
Receiving RDS broadcasts