Loading printing paper – Sharp UX-B30 User Manual

Page 18

Advertising
background image

Loading Printing Paper

14

Loading Printing Paper

You can load up to 100 sheets of A4-size paper (60 - 80 g/m

2

) in the paper

tray (at room temperature; maximum stack height should not be higher than
the line on the tray).

1

Fan the paper, and then tap the edge
against a flat surface to even the stack.
Make sure the stack edges are even.

2

Insert the stack of paper into the tray,

PRINT SIDE UP.

•

If paper remains in the tray, take it out and combine it into a single stack
with the new paper.

•

Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.

•

GENTLY LOAD PAPER INTO THE PAPER TRAY.

•

DO NOT FORCE IT DOWN INTO THE FEED SLOT.

Note: Do not use paper that has already been printed on, or paper that is curled.

The stack
should not
be higher
than this line

all.book Page 14 Tuesday, June 1, 2004 4:24 PM

Advertising