Sony CPD-101VS User Manual
Page 13
13
Getting Started
to a power outlet
Power cord (supplied)
p
Step 2: Connect the power cord
With the display switched off, connect the power cord to the display
and the other end to a power outlet.
p
Step 3: Turn on the display, and then your
computer.
For proper Plug and Play recognition, turn on the display before you
turn on your computer.
✔
Note on Warning Messages
If there is something wrong with the input signal, one of the following messages appears.
“OUT OF SCAN RANGE”
This indicates that the input signal is not supported by the display’s specifications.
“NO INPUT SIGNAL”
This indicates that video signal is missing.
To solve these problems, see “Troubleshooting” on page 37.
p
Step 4: If necessary...
Adjust the user controls according to your personal preference.
The installation of your display is complete. Enjoy your display.