Sony CPD-101VS - Manual (Page 32)

32
Graphic Picture Enhancement (GPE)
Available GPE modes
Graphic Picture Enhancement is a function designed for your viewing
comfort.
There are four GPE modes: AUTO, MODE 1, MODE 2 and OFF.
The default setting is “AUTO.”
p AUTO mode
This mode is effective only with “IntelliLight

” compatible applications.
When an image playback window with “IntelliLight” coding appears on
the screen, the display senses the exact location and size of the window
and applies a higher brightness and sharpness effect to images inside the
window, while the rest of the screen remains at standard picture quality.
For inquiries about “IntelliLight” and compatible software, check Sony’s
web site (www.ita.sel.sony.com) or call Sony Technical Support (1-888-
4SONYPC).
“IntelliLight

” is a trademark of Sony Electronics Inc.
✔
Note on the AUTO mode
If one of the four corners of the “IntelliLight” window is covered or if the window goes
beyond the screen border, the GPE effect turns off.
✎
Tip
You can adjust the picture contrast or brightness of the screen outside of the “IntelliLight”
window. The “IntelliLight” window always remains clear and sharp regardless of the
adjustments made to the rest of the screen.
p MODE 1
Higher contrast is applied across the entire screen. MODE 1 is designed
to enhance still image presentations.
✔
Note on MODE 1
Whenever the screen resolution is changed, power saving activated, or power turned off,
MODE 1 is cancelled and GPE returns to the AUTO mode.
Graphic Picture Enhancement (GPE)
Window with “IntelliLight” coding has
higher brightness and sharpness.
Standard picture quality