Siemens SPARC ENTERPRISE M8000 - Manual (Page 38)

30 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1072 • September 2008
2. Type the following command:
The following example displays 00-0 has 64GB of memory while the other system
boards have 16GB.
Using the prtdiag Command to Identify
Memory Size
■ On the domain, execute the prtdiag command.
The following example displays different memory sizes.
XSCF> showdevices -d domain_id
XSCF> showdevices -d 1
Memory:
-------
board perm base domain target deleted remaining
DID XSB mem MB mem MB address mem MB XSB mem MB mem MB
01 00-0 63680 0 0x0000004000000000 260288
01 03-0 16384 7384 0x0000034000000000 260288
01 03-1 16384 0 0x0000030000000000 260288
01 03-2 16384 0 0x000002c000000000 260288
01 03-3 16384 0 0x0000028000000000 260288
# prtdiag
# prtdiag
============================ Memory Configuration ============================
Memory Available Memory DIMM # of Mirror Interleave
LSB Group Size Status Size DIMMs Mode Factor
--- ------ ------------------ ------- ------ ----- ------- ----------
00 A 32768MB okay 2048MB 16 no 8-way
00 B 32768MB okay 2048MB 16 no 8-way
03 A 8192MB okay 2048MB 4 no 2-way
03 B 8192MB okay 2048MB 4 no 2-way
04 A 8192MB okay 2048MB 4 no 2-way
04 B 8192MB okay 2048MB 4 no 2-way
05 A 8192MB okay 2048MB 4 no 2-way
05 B 8192MB okay 2048MB 4 no 2-way
06 A 8192MB okay 2048MB 4 no 2-way