SUPER MICRO Computer 5014C-MF - Manual (Page 15)

Chapter 1: Introduction
1-5
1-3 Server Chassis Features
The SuperServer 5014C-MF is built on the SC513L-260 1U rackmount server
chassis. The SC513L-260 features a unique design that places all I/O ports at the
front of the chassis for easy access. The following is a general outline of the main
features of the SC513L-260 chassis.
System Power
When confi gured as a SuperServer 5014C-MF, the SC513L-260 chassis includes
a single 260W power supply.
Serial ATA Subsystem
The SC513L-260 chassis was designed to support one internal 3.5" Serial ATA hard
drive. This Serial ATA drive is not hot-swappable; power must be removed from
the system before installing or replacing. ATA/100 IDE drives can be alternately
supported.
Control Panel
The control panel on the SC513L-260 provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and system overheat conditions. The control panel also includes a main power
button and a system reset button.
Front I/O Panel
The I/O panel for the SC513L-260 is located on the front side of the chassis. It
provides one COM port, two USB ports, PS/2 mouse and keyboard ports, a graph-
ics port and two Gb Ethernet ports. (See Figure 1-2.)