SUPER MICRO Computer 5014C-MF - Manual (Page 47)

Chapter 5: Advanced Motherboard Setup
5-9
5-7 Adding PCI Cards
1. 64-bit PCI-X slot
The 5014C-MT has a riser card (p/n CSE-RR1U-X) designed specifi cally for use
in the SC513L-260 1U rackmount chassis (included with the system). This riser
card allows a 64-bit, 133 MHz (3.3V) standard size PCI-X card to sit at a 90 degree
angle so it can fi t inside the chassis.
2. PCI card installation
The riser card has already been preinstalled into the motherboard. Perforn the
following steps to add a PCI add-on card:
1. Remove the appropriate PCI slot shield by releasing the locking tab.
2. Insert the add-on card into the riser card.
3. Secure the add-on card with the locking tab.