SUPER MICRO Computer 5014C-MF - Manual (Page 56)

5-18
S UPER S ERVER 5014C-MF User's Manual
System Power Force On
Jumper JPF allows you to enable or
disable the Force-Power-On function.
If enabled, system power will always
stay on. If disabled (the normal set-
ting), the user needs to press the power
button to power on the system.
USB Wake-Up
Use JPUSB1/2 to enable or disable
USB Wake-Up, which allows you to
wakeup the system by depressing a
key on the keyboard or by clicking the
mouse when either is connected to a
USB port. Enable the jumper to allow
the system to be woken up from an
S1 or S3 state in Windows OS. The
JPUSB1 jumper controls the USB1/2
ports and the JPUSB2 jumper controls
the USB2/3 and USB4/5 headers.
See the table on the right for jumper
settings.
Keyboard Wake-Up
The JPWAKE1 jumper is used to al-
low the system to be woken up by
depressing a key on the keyboard
from an S1 or S3 state in Windows
OS. See the table on the right for
jumper settings. Your power supply
must meet ATX specifi cation 2.01 or
higher and supply 720 mA of standby
power to use this feature.
USB Wake-Up
Jumper Settings
(JPUSB1/2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
Keyboard Wake-Up
Jumper Settings
(JPWAKE1)
Jumper Setting Defi nition
Pins 1-2 Disabled
Pins 2-3 Enabled
System Power Force On
Jumper Settings
(JPF)
Jumper Setting Defi nition
Closed Force On
Open Disabled