Sony PCLK-MN10A - Manual (Page 66)

66
Dividing tracks
You can divide a single track into two tracks.
Note
While this dialog box is displayed, the MD cannot be operated by the system
stereo component.
1
Open the MD window (page 14).
2
Play the track you want to divide (page 46).
Note
Only the track being played can be divided.
3
Click the MD edit button where you want to divide the track.
The division point is selected temporarily.
The “Divide” dialog box appears and Rehearsal playback starts
from the position you clicked.
To cancel the divide, click .
4
Adjust the division point.
Each click on or in the “Divide” dialog box moves the division
point by 1-frame intervals* (1 frame = 1/86 second) during stereo
recording. You can also slide
to the left or right to adjust the
division point.
Rehearsal playback starts again from the new division point.
* In Monaural and LP2 stereo mode : 2-frame intervals
In LP4 stereo mode : 4-frame intervals
5
When the adjustment is completed, click .
The track is divided into two.