Sony PCLK-MN10A - Manual (Page 98)

98
Adding an image to the File Jacket display
You can add one jacket image (bitmapped or JPEG file) for each file
album.
1
Open the File window (page 28).
2
Drag a bitmapped image file from the Explorer and drop it onto the
Jacket display.
The bitmapped image will appear in the Jacket display.
z Tips
• The bitmapped image file that is dragged and dropped is copied to the Jacket
folder (default location: C:\Program Files\M_crew\Jacket), which is located
in the same folder as the M-crew application.
• When the image in the Jacket folder is deleted, the image in the Jacket display
will not disappear. To delete the Jacket display image, right-click the Jacket
display, and then click “Initialize image.” The image file in the Jacket folder,
on the other hand, is not affected when the Jacket display image is deleted.
Note
If you add a JPEG image to the Jacket display while playing a file album, the
track being played may be interrupted. Do not add a JPEG image to the jacket
display, especially when recording to an MD. Doing so will cause distortion in
the recorded sound.