Spalding M881119 - Manual (Page 31)

12/05 ID# M881111
31
5
2.
1.
Use wedge to tap cap of ground sleeve until tight.
4
10ft
(3.05 m)
26
After concrete has cured, remove tape, install pole cap (26), fit pole assembly into sleeve (4).
DO NOT USE THE BACKBOARD OR RIM TO
MOVE POLE ASSEMBLY INTO POSITION. THE
BACKBOARD AND RIM ARE NOT LOCKED AND
WILL ROTATE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
WARNING!
PLAYING SURFAC
E
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!